Sản phẩm tiêu biểu

Lượt xem: 3541

DE10-Standard

Mã sản phẩm : p0493

DE10-Standard

8.499.000đ
Số lượng:

    he DE10-Standard board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.

     

    The following hardware is provided on the board:

     

    FPGA Device

    • Cyclone V SX SoC—5CSXFC6D6F31C6N
    • 110K LEs, 41509 ALMs
    • 5,761 Kbits embedded memory
    • 6 FPGA PLLs and 3 HPS PLLs
    • 2 Hard Memory Controllers

     

    ARM-Based Hard Processor System (HPS)

    • 925 MHz, Dual-Core ARM Cortex-A9 MPCore Processor
    • 512 KB of Shared L2 Cache
    • 64 KB of Scratch RAM
    • Multiport SDRAM Controller with Support for DDR2, DDR3, LPDDR1, and LPDDR2
    • 8-Channel Direct Memory Access (DMA) Controller

    Configuration and Debug

    • Serial Configuration Device – EPCS128 on FPGA
    • On-Board USB Blaster II (Normal Type B USB Connector)

    Memory Device

    • 64MB (32Mx16) SDRAM on FPGA
    • 1GB (2x256Mx16) DDR3 SDRAM on HPS
    • MicroSD Card Socket on HPS 

    Communication

    • Two USB 2.0 Host Ports (ULPI Interface with USB Type A Connector) on HPS
    • USB to UART (Micro USB Type B Connector) on HPS
       
    • 10/100/1000 Ethernet on HPS
    • PS/2 Mouse/Keyboard 
    • IR Emitter/Receiver

     

    Connectors

    • One 40-pin Expansion Header (Voltage Levels: 3.3V)
    • One HSMC Connector(Configurable I/O Standards 1.5/1.8/2.5/3.3V)
    • One 10-Pin ADC Input Header
    • One LTC Connector (One Serial Peripheral Interface (SPI) Master ,One I2C and One GPIO Interface ) on HPS

     

    Display

    • 24-bit VGA DAC
    • 128x64 Dots LCD Module with Backlight on HPS

    Audio

    • 24-bit CODEC, Line-in, Line-out, and Microphone-In Jacks

    Video Input

    • TV Decoder (NTSC/PAL/SECAM) and TV-In Connector

    ADC

    • Sample Rate: 500 KSPS
    • Channel Number: 8
    • Resolution: 12 bits
    • Analog Input Range : 0 ~ 4.096 V

    Switches, Buttons and Indicators

    • 4 User Keys (FPGA x4)
    • 10 User Switches (FPGA x10)
    • 11 User LEDs (FPGA x10 ; HPS x 1)
    • 2 HPS Reset Buttons (HPS_RST_n and HPS_WARM_RST_n)7-Segment Display x6 

    Sensors

    • G-Sensor on HPS

    Power

    • 12V DC Input

    Block Diagram of the DE10-Standard Board

    Connectivity

    • Connect LT24

    • Connect MTL2


     

    • Connect D8M


     

    • Connect D5M


     

    • Connect SMK


     

    • Connect RFS


     

    • Connect HTG


     

    • Connect ADA


     

    • Connect DCC


     

    • Connect LTC2607 (AD/DA Daugher Card)


Sản phẩm liên quan

Đang cập nhật