Sản phẩm tiêu biểu

Lượt xem: 5401

DE10-Nano Kit

Mã sản phẩm : p0496

DE10-Nano Kit

3.299.000đ
Số lượng:

    The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.

    The following hardware is provided on the board:

    FPGA Device

    • Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
    • Serial configuration device  – EPCS64 (revision B2 or later)
    • USB-Blaster II onboard for programming; JTAG Mode
    • HDMI TX, compatible with DVI 1.0 and HDCP v1.4
    • 2 push-buttons
    • 4 slide switches
    • 8 green user LEDs
    • Three 50MHz clock sources from the clock generator
    • Two 40-pin expansion headers
    • One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
    • One 10-pin Analog input expansion header (shared with Arduino Analog input)
    • A/D converter, 4-pin SPI interface with FPGA

    * If the specification of memory device in Quick Start Guide and official website is discordant, refer to DE10-Nano website as the sole stardard.

    HPS (Hard Processor System)

    • 800MHz Dual-core ARM Cortex-A9 processor
    • 1GB DDR3 SDRAM (32-bit data bus)
    • 1 Gigabit Ethernet PHY with RJ45 connector
    • USB OTG Port, USB Micro-AB connector
    • Micro SD card socket
    • Accelerometer (I2C interface + interrupt)
    • UART to USB, USB Mini-B connector
    • Warm reset button and cold reset button
    • One user button and one user LED
    • LTC 2x7 expansion header

    Block Diagram of the DE10-Nano Board

     

    Connectivity

    • Connect Arduino

Sản phẩm liên quan

Đang cập nhật